Stopper Pneumatic Cylinders - Stopper Cylinder Series / Parker Pneumatic - Europe STVDR50-30-STD

Pneumatic stop cylinders with hydraulic industrial shock absorbers for soft, rebound free stopping of conveyed load weights of up to 1700kg and speeds of up to 45 m/min. Suitable for vertical and horizontal installation.

Pneumatic stop cylinders with hydraulic industrial shock absorbers for soft, rebound free stopping of conveyed load weights of up to 1700kg and speeds of up to 45 m/min. The design of the robust lightweight diecast aluminium body and the compact size enables the unit to be installed vertical and horizontal in many different conveyor systems.

■ STVSR series - Integrated shock absorber for heavy conveyed loads : The built-in shock absorber stops the conveyed load in a gentle and precise manner without disturbing the load. Various shock absorbers are available depending on the weight of the conveyed load and the desired transport speed.

■ STVDR series - Roller for lower conveyed load weights : The piston rod with upward facing roller is lowered by applying compressed air once the conveyed load is on the ground. Afterwards, it is brought back into the upper end position by a return spring.

■ STVD series - Direct stopping piston rod for heavy conveyed loads : Reliably stops heavy conveyed loads at low transport speeds. Can also be used as a locking cylinder due to its solid piston rod.

■ STHSR series - Horizontal stop cylinder with shock absorber : Reliably stops heavy conveyed loads at high transport speeds. Well-suited for buffer areas.


General Technical Data:
• International Standards : N/A
• Bore Sizes : Ø50 and Ø80mm
• Stroke Length : 30, 40 and 50mm
• Versions : Double acting / Single acting spring return
• Cushioning : Rubber buffer or hydraulic industrial shock absorber
• Position Sensing : Optional position sensors for piston rod or rocker
• Installation : Directly mounted
• Mounting Position : Any

Operating and Environmental Data:
• Operating Medium : For best possible service life and trouble-free operation dry, filtered compressed air to ISO 8573-1:2010 quality class 3.4.3 should be used. This specifies a dew point of +3°C for indoor operation (a lower dew point should be selected for minus temperature operation and we recommend the use of an inline dryer) and is in line with the air quality from most standard compressors with a standard filter.
• Operating Pressure : 2 to 10 Bar
• Operating Temperature : Standard temperature 0°C to +65°C
• Pre-lubricated : Further lubrication is normally not necessary. If additional lubrication is introduced it must be continued.
• Corrosion Resistance : Resistant to corrosion

Material Specification:
• End Cover : Die cast aluminium
• Cylinder Barrel : Die cast aluminium

Характеристики