Артикул: PRK3475
Hypersep STH & SFH series high pressure centrifugal water separator (For pressures up to 40 barg)
Доступно к заказу
Цена по запросу
Гарантия лучше цены
Предложим наиболее выгодную цену на данный товар
PED approved centrifugal high pressure water separators with low pressure drop for the removal of bulk condensate water from compressed air in industrial applications.
Полное описание продукта
Hypersep high pressure water separators utilise centrifugal technology for the effective removal of bulk liquid from a compressed air system; providing essential downstream protection as well as the added benefit of improving the performance of other downstream equipment.Designed to be maintenance free, Hypersep high pressure water separators are available in both threaded and flanged connections and can be installed in horizontal or vertical configuration. Hypersep Series water separators are available for volume flows up to 5826 m³/hr and operating pressures of up to 40 barg.
Requiring no external power, the easy to install Hypersep features unique Hirosheild surface protection, enabling the water separator to withstand the toughest industrial conditions. Hypersep high pressure water separators are available in carbon steel and are designed to operate at pressures up to 40 barg.
Sizing and Selection
Important Note: For quoted air purity performance, water separators must be sized correctly for minimum operating pressure and maximum inlet flow rate using the correction factors found in the Product Information Sheet.
For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor.
Характеристики
| Максимальное рабочее давление: | 40 barg, 580.15 psig |
| Вес: | 4.5 to 151 kg, 9.92 to 332.90 lb |
| Ширина: | 148 to 660 mm, 5.83 to 25.98 inch |
| Высота: | 280 to 1135 mm, 11.02 to 44.69 inch |
| Тип соединения: | BSP-T or Horizontal Flanged DIN EN 1092-1 |
| Максимальный расход: | 31.78 to 3429.08 CFM |
| Материалы изготовления: | Housing: Carbon Steel, Seals: FASIT 50 |
| Максимальная рабочая температура: | 65 °C, 149 °F |
| Минимальная рабочая температура: | 0 °C, 32 °F |
| Бренд: | Parker Hiross |
| Соблюдены требования технических условий: | PED, others on request (GOST, ASME, SELO) |
| Применение: | Bulk liquid removal from compressed air and gaseous nitrogen |
Характеристики
- Бренд
- Parker Hiross
- Вес
- 4.5 to 151 kg, 9.92 to 332.90 lb
- Высота
- 280 to 1135 mm, 11.02 to 44.69 inch
- Максимальная рабочая температура
- 65 °C, 149 °F
- Максимальное рабочее давление
- 40 barg, 580.15 psig
- Максимальный расход
- 31.78 to 3429.08 CFM
- Материалы изготовления
- Housing: Carbon Steel, Seals: FASIT 50
- Минимальная рабочая температура
- 0 °C, 32 °F
- Применение
- Bulk liquid removal from compressed air and gaseous nitrogen
- Соблюдены требования технических условий
- PED, others on request (GOST, ASME, SELO)
- Тип соединения
- BSP-T or Horizontal Flanged DIN EN 1092-1
- Ширина
- 148 to 660 mm, 5.83 to 25.98 inch
Нет отзывов об этом товаре.