Series 3 - Miniature Inert Liquid Valve

Parker's Series 3 family of liquid valves provide an inert wetted path for your aggressive liquids including bleach and other harsh solvents.

Полное описание продукта

The Series 3 solenoid valve is constructed of inert materials suitable for both liquids and gases. It can handle various liquid and gases including bleach and saline, for applications in analytical chemistry, clinical chemistry, blood chemistry, and ink jet printing. These 2-way and 3-way valves provide high flow in a small valve with pressures up to 100 psi. Feature no metal-to-metal sliding surfaces, which ensure long and trouble free operation. These valves offer an excellent long life alternative to pinch valves, since there is no pinched tubing to wear out. Series 3 also offers a higher pressure rating than most diaphragm isolation valves.

• Wetted parts are engineered plastic (PEEK), stainless steel, and elastomer (FKM or EPDM)
• Chemically resistant to moderate acids, bases, dilute bleach and saline
• Integral molded and machined barbs for soft tubing eliminate potential leaks at connection
• High flow in small package provides fast cycle times and low pressure losses
• No sliding metal-to-metal surfaces minimizes wear of moving parts
• Direct acting design does not require pressure or vacuum to operate
• RoHS compliant

Typical Applications:

Control of:
Wash solutions
Waste delivery
Reagents
Inks
Dilute Bleach
Aggressive Media

Характеристики

Расход:	Up to 1500 sccm
Максимальный расход:	1500 sccm
Максимальное рабочее давление:	100 psi, 6.89 bar
Диапазон от вакуума до определенного давления:	Vacuum to rated pressure (Orifice Dependent)
Типоразмер диафрагмы:	0.055, 0.078, 0.090 inch, 1.40, 1.98, 2.29 mm
Максимальная рабочая температура:	150 °F, 66 °C
Минимальная рабочая температура:	40 °F, 4 °C
Функция:	2-Way Normally Closed (NC), 3-Way
Тип клапана:	Inert Non-Isolation Valve
Количество циклов за срок службы:	10 Million
Тип срабатывания:	Solenoid
Тип эксплуатации:	Electronic
Метод регулирования:	Current or Voltage
Потребляемая мощность:	2.5, 4.2 Watts
Напряжение на входе:	12, 24 VDC
Электрические соединения:	12" Wire Leads
Материал корпуса:	PEEK
Материал уплотнения:	FKM or EPDM
Длина:	1.32 inch, 33.5 mm
Ширина:	0.81 inch, 20.6 mm
Высота:	2.13 inch, 54.1 mm
Вес:	2.0 oz, 56 g
Время отклика:
Интенсивность утечек:	Bubble Tight
Тип монтажа:	Mounting Screw
Тип соединения:	Manifold Mount or Barbs for I.D. Tubing
Присоединительный размер:	Manifold Face or 1/16” (1.6 mm), 1/8” (3.2 mm), or 3/16” (4.8 mm) [Orifice Dependent]
Для типа жидкости:	Liquids
Область примиенения в промышленности:	Solvent management for Liquid Chromatography, Highly aggressive media dispensing and control
Конфигурация:	N/A