KA-MT 1-8 series compressed air adsorption dryers with activated carbon stage

Compact, heatless compressed air adsorption dryers with activated carbon stage for industrial applications and volume flows up to 86 m³/h and dew points of -25°C to -70°C.

Полное описание продукта

Parker Zander KE-MT Series heatless adsorption dryers are designed to supply high quality dry compressed air reliably and efficiently down to a pressure dew point of -70 °C. They are capable of volume flows of up to 6100m³/h at operating conditions of 7 barg (100psig).

The KE-MT Series is offered with energy saving dew point dependent switching (DDS) as an option. Where an application calls for a unit able to cope with variations in operating pressure and load, the installation of a dew point sensor at the outlet of the dryer is available. In such an operating mode, the changeover cycle between vessels only takes place when required, and is dependent on the required dew point being achieved. Only upon reaching this adjustable set dew point, does changeover to the regenerated vessel occur. This feature enables the drying phase to be lengthened and thus avoids the unnecessary use of purge air for regeneration and consequently provides significant energy savings.

When there is a further requirement for compressed air to be delivered free from oil vapour and odours, as well as clean and dry, the units can be supplied with an additional third vessel filled with activated carbon, the KEA-MT Series. KEA-MT is ideal for use in laboratory, food, beverage and pharmaceutical applications.

Sizing and Selection
To ensure quoted air purity performance is met, a compressed air dryer must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor.

Характеристики

Подразделение:	Gas Separation and Filtration Division EMEA
Бренд:	Parker
Технологии:	Filtration
Применение:	Compressed Air Applications
Тип продукта:	Compressed Air Dryer
Модель продукта:	Heatless
Серия продуктов:	KA-MT 1-8
Промышленность:	Industrial Manufacturing EquipmentFood & BeverageAutomotiveElectronicsPharmaceuticalsMedical & Dental
Расход:	8 to 86 m³/h @ 7 barg(5 to 51 cfm @ 102 psig)
Точка росы под давлением:	Standard: -40°C (-40°F)Options: -70°C (-100°F) or -20°C (-4°F)
Класс по ISO:	Standard: Class 2.2.1Options: Class 2.1.1 or Class 2.3.1
Рабочее давление:	4 to 16 barg(58 to 232 psig)
Рабочая температура:	5 to 50°C(41 to 122°F)
Температура окружающей среды:	50°C (122°F) Maximum
Требования к электроснабжению:	Standard: 85 - 265V 1ph 50/60HzOptional: 115V 1ph 50/60Hz 24V DC
Размер порта:	¼ to ¾ inch
Тип соединения:	BSPP
Степень защиты, обеспечиваемая оболочкой:	IP65 Indoor and Frost Free Installation Only
Соблюдены требования технических условий:	PED 2014/68/EU Fluid Group II
Уровень шума:	65-86 dB(A)
Высота:	403 to 1558 mm(16 to 61 inch)
Ширина:	486 to 692 mm(19 and 27 inch)
Глубина:	210 and 300 mm(8 and 12 inch)
Вес:	15 to 92 Kg(33 to 203 lbs)