K-MT 1-8 Series Heatless Compressed Air Dryer

Compact, heatless compressed air dryers for applications requiring volume flows up to 86m³/h @ 7 barg and dew points of -40°C (-25°C and -70°C options).

Полное описание продукта

The Parker K-MT 1-8 range of heatless adsorption dryers are designed to dry industrial compressed air reliably and efficiently down to a pressure dew point of -40°C (-25°C and -70°C options available). The units are compact and can be installed either free-standing or wall mounted. They come equipped with integrated high performance OIL-X pre- and after filtration and are capable of volume flows up to 86 m³/h in a system operating at 7 barg (100 psig).

Features
• Pressure dew points down to -40°C (-25°C and -70°C options available)

• Volume flows up to 86 m³/h @ 7 barg (100 psig)

• High performance pre- and after filters installed as standard

• Energy saving dew point dependent switching (DDS) as an option

Benefits
• Highest quality air

• Compact and space saving

• Energy efficient

• Very flexible due to a wide range of options and accessories

Energy Savings
Where an application calls for a unit able to cope with variations in operating pressure and load, the installation of a dew point sensor at the outlet of the dryer is available as an option. In such an operating mode, the changeover cycle between chambers only takes place when required, and is dependent on the required dew point being achieved. Only upon reaching this adjustable set dew point, does changeover to the regenerated chamber occur. This feature enables the drying phase to be lengthened and thus avoids the unnecessary use of purge air for regeneration and consequently provides energy savings.

Compressed air can be selectively dried to meet a dew point of -25°C down to -70°C.

Sizing and Selection
To ensure quoted air purity performance is met, a compressed air dryer must be sized correctly for minimum operating pressure, maximum inlet temperature and maximum inlet flow rate using the correction factors found in the Product Information Sheet.

For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor.

Характеристики

Подразделение:	Gas Separation and Filtration Division EMEA
Бренд:	Parker
Технологии:	Filtration
Применение:	Compressed Air Applications
Тип продукта:	Compressed Air Dryer
Модель продукта:	Heatless
Серия продуктов:	K-MT 1-8
Промышленность:	Industrial Manufacturing EquipmentFood & BeverageAutomotiveElectronicsPharmaceuticalsMedical & Dental
Расход:	8 to 86 m³/h @ 7 barg(5 to 51 cfm @ 102 psig)
Точка росы под давлением:	Standard: -40°C (-40°F)Options: -70°C (-100°F) or -20°C (-4°F)
Класс по ISO:	Standard: Class 2.2.1Options: Class 2.1.1 or Class 2.3.1
Рабочее давление:	4 to 16 barg(58 to 232 psig)
Рабочая температура:	5 to 50°C(41 to 122°F)
Температура окружающей среды:	50°C (122°F) Maximum
Требования к электроснабжению:	Standard: 85 - 265V 1ph 50/60HzOptional: 115V 1ph 50/60Hz 24V DC
Размер порта:	¼ to ¾ inch
Тип соединения:	BSPP
Степень защиты, обеспечиваемая оболочкой:	IP65 Indoor and Frost Free Installation Only
Соблюдены требования технических условий:	PED 2014/68/EU Fluid Group II
Уровень шума:	65-86 dB(A)
Высота:	434 to 1589 mm(17 to 63 inch)
Ширина:	486 to 692 mm(19 and 27 inch)
Глубина:	210 and 300 mm(8 and 12 inch)
Вес:	15 to 92 Kg(33 to 203 lbs)