Parker - лидер в производстве линейных приводов и цилиндров
Компания Parker - лидер в производстве линейных приводов и цилиндров для различных видов систем - пневматических, электр...
Читать далее →Артикул: LCB060LG01500SLN
В наличии
Цена по запросу Стоимость зависит от выбранного способа оплаты и количества товара.
Не отвечаем 5 минут — скидка на весь заказ!
Нужна скидка? Звони — сделаем лучшее предложение
Работаем по всей России
Возможны самовывоз и доставка по всей территории России
Надежность
Профессиональная поддержка
LCB060 actuators incorporate a low friction, dry running slide bearing driven by a steel reinforced timing belt providing a high speed, high acceleration solution at a low cost. They are suitable for loads of up to 295N and can move at speeds up to 8m/s
LCB is a compact, robust linear actuator with an external sliding guidance system and integrated toothed belt drive - the construction is simple, economic and robust, making the LCB a cost effective alternative to traditional toothed belt actuators. The simple, cost effective design of the LCB is also well suited for replacing pneumatic actuators in applications requiring a higher level of performance and control. Combined with Parker motors and controls, the LCB offers a fully programmable, high performance solution at a great value.
LCB060 Belt Driven Linear Actuator - Features:
• Profile Width : 60 mm
• Maximum Load Capacity : 3850 N
• Thrust Forces : up to 560 N
• Travel Lengths : up to 5.5 m
• Speeds : up to 8 m/s
• Accelerations : up to 20 m/s²
• Typical Repeatability : ± 0.2 mm
• External Sliding Guide - clean and dry, no need for lubrication that can attract dust particles
• Toothed Belt and Pulley Drive Mechanism - high service life and low noise operation
• Low purchase, installation and operating costs
Typical Application Areas:
• Pick-&-Place Applications
• Packaging, Labeling and Wrapping Systems
• Sensor and Format Adjustment (e.g. back-stop)
• Pusher-, Picker- and Gripper Applications
• Positioning
• Feeding
• Cutting
| Приводная установка: | One Drive Shaft |
| Ориентация привода: | Drive Shaft on Left |
| Тип каретки: | Long Carriage, 250mm Long |
| Ход (мм): | Stroke Length - 1500mm |
| Серия продуктов: | LCB |
| Ширина профиля: | 60 mm, 1 - 75mm |
| Тип вала привода: | Belt |
| Тип подшипника: | Slider Bearing |
| Максимальная длина хода: | 1500 mm, 59.1 inch |
| Максимальная рабочая скорость: | 8 m/sec, 315 inch/sec |
| Максимальное ускорение: | 20 m/sec2, 787 inch/sec2 |
| Максимальная тяга: | FX: 560 N, FX: 126 lb |
| Допустимая нагрузка: | FZ: 200 N, FZ: 3850 N, 0 - 300N |
| Воспроизводимость: | ±: 0.2 mm, ±: 0.008 inch |
| Двунаправленная воспроизводимость: | 0.11 - 0.25 mm |
| С блоком холостого хода: | On Demand |
| Дополнительный вариант защиты входит в комплект: | - |
| Предусмотрено коррозионно-стойкое исполнение: | On Demand |
| Соблюдены требования технических условий: | - |
| Тип обратной связи: | None |
Официальный поставщик PARKER
Продажи на территории России
Оптовые и розничные продажи
Снижение логистических расходов
Индивидуальные условия
Выгода без посредников
Единая система поставок
Весь ассортимент на складе