Доступно к заказу
Цена по запросу
The pressure sensor is an absolute pressure sensor designed to produce a voltage output that is proportional to the applied pressure.
The pressure sensors is used for fuel tank inerting system health monitoring and for system safety shutdown monitoring.
The pressure sensor is an absolute pressure sensor designed to produce a voltage output that is proportional to the applied pressure. The pressure sensor used in the fuel tank inerting system are known for high accuracy, good reliability and stability in the environmental conditions which fuel tank inerting system is exposed to. It is tested to most severe EMC, HIRF, vibration and shock requirements of DO-160G standards.
The voltage output is used in inerting application and the electrical interface is an EN2997 connector.
APPLICATIONS:
• Commercial Aircraft
• Regional Transports
FEATURES AND ATTRIBUTES:
• Pressure sensor is tested to most severe DO-160G EMC and HIRF requirements
• Electrical connector is EN2997
• Pressure port is AS4375
Характеристики
| Максимальная рабочая температура: | -55 to 200 °C |
| Вес: | Less than 140 gram |
| Точность: | 0 to 90 psia inch, ±1% full scale |
| Испытательное давление: | up to 100 psig |
| Давление разрыва: | up to 205 psig |
- Вес
- Less than 140 gram
- Давление разрыва
- up to 205 psig
- Испытательное давление
- up to 100 psig
- Максимальная рабочая температура
- -55 to 200 °C
- Точность
- 0 to 90 psia inch, ±1% full scale
Нет отзывов об этом товаре.