Артикул: EAPF1220QIHBT1MN082
High Pressure Stainless Steel In-line Filter - EAPF iProtect® Series EAPF1220QIHBT1MN082
Доступно к заказу
Цена по запросу
EAPF iProtect® stainless steel in-line filter series is designed to provide high quality filtration of hydraulic systems in Marine, Oil & Gas and process equipment markets covering a range up to 120l/min at max 690 bar pressure level.
EAPF iProtect® stainless steel filters series has patented element design which quarantees the quality of filtration directly impacting the system reliability.
The iProtect® product applies a re-usable element core which can be combined with a bypass valve, reducing the environmental impact over 50% typically.
The EAPF applies twin seal technology ensuring that external contamination including water cannot ingress the threaded connection between the filter head and bowl. A special hole pattern is applied in the bowl for decompression of the threaded area.
EAPF filter is ATEX certified filter housing and is available with ATEX approved indicators.
Typical Applications
• Drilling equipment
• Lifting equipment
• Sub sea systems
• Deck equipment
• Flushing rigs
• Chemical injection
Характеристики
| Расход: | 0 to 100 l/min |
| Расчетное давление перепускного клапана: | No Bypass |
| Тип соединения: | ½"NPT |
| Тип фильтрующего элемента: | 20QI High Strength Element |
| Номинальное значение в микронах: | 20 µm |
| Варианты исполнения: | No Bypass |
| Тип индикатора: | Electrical Switch NO/NC non ATEX |
| Настройка индикатора давления: | 5.0 bar |
| Материал уплотнения: | Nitrile |
- Варианты исполнения
- No Bypass
- Материал уплотнения
- Nitrile
- Настройка индикатора давления
- 5.0 bar
- Номинальное значение в микронах
- 20 µm
- Расход
- 0 to 100 l/min
- Расчетное давление перепускного клапана
- No Bypass
- Тип индикатора
- Electrical Switch NO/NC non ATEX
- Тип соединения
- ½"NPT
- Тип фильтрующего элемента
- 20QI High Strength Element
Нет отзывов об этом товаре.